EURONDA Autoclave Technical Service
You can request 24/7 technical support by calling +902165195853 or contacting us via WhatsApp.
We provide remote and on-site technical support worldwide.
EURONDA Autoclave Error Codes
E01 Abnormal change in supply voltage
E02 Power outage
E19 Overpressure
E21 Overpressure
E22 Insufficient pressure
E23 Overheating
E24 Insufficient heat
E25 Unsaturated steam
E26 Vacuum error
E27 Pressure error
E28 Pressure variation
E29 Pressure equalization error
E31 Vacuum test error
E32 Vacuum test error
E33 Vacuum test error
E34 Vacuum test error
E35 Vacuum test error
E41 Steam generator temperature sensor faulty
E42 Upper clamp temperature sensor faulty
E43 Lower clamp temperature sensor faulty
E44 Condenser coil temperature Sensor faulty
E45 Boiler heat sensor faulty
E46 Pressure sensor faulty
E47 Door closing sensor faulty
E48 Door blocking sensor faulty
E51 Steam generator not active
E54 Steam generator temperature too high
E55 Upper clamp temperature too high
E56 Lower clamp temperature too high
E58 Lower clamp resistance temperature too high
E62 Water injections depleted.
E81 Water supply from Aquafilter deionizer not working
E59 Condenser battery temperature too high
*E99 Power board / display data transfer problem
E100 Display / power board data transfer problem
For your autoclave technical service, new autoclave sales, used autoclave sales needs, as well as autoclave troubleshooting, maintenance, repair, installation, and remote assistance requirements, please feel free to contact us 24/7.